Home > Hastelloy Alloy >

Petrochemical 2.4819 ASTM B575 Hastelloy C276 Sheet

Product Categories

Super Duplex Stainless Steel [22]
Duplex Stainless Steel Pipe [22]
Duplex Stainless Steel Plate [35]
Duplex Stainless Steel Rod [11]
Super Duplex Seamless Pipe [12]
Duplex Stainless Steel Flanges [12]
Super Duplex Pipe Fittings [15]
Super Austenitic Stainless Steel [16]
Precipitation Hardening Stainless Steel [13]
Incoloy Alloy [28]
Inconel Alloy [21]
Monel Alloy [10]
Hastelloy Alloy [20]
Nickel Based Alloys [19]
Bimetal Clad [8]

Shanghai Aboom Metal prodcut co.,ltd

Contact Now

Petrochemical 2.4819 ASTM B575 Hastelloy C276 Sheet

Ask Lasest Price
Brand Name :	ABOOM
Model Number :	Hastelloy C-276
Certification :	EN 10204 Type 3.1
Price :	USD Negotiable
Payment Terms :	T/T
Supply Ability :	200 tons per week
Delivery Time :	7-15dyas

Add to Cart

Product Details
Company Profile

Petrochemical 2.4819 ASTM B575 Hastelloy C276 Sheet

ASTM B575 Hastelloy C-276 Hastelloy Alloy

Hastelloy C-276 / N10276 / 2.4819 Nickel Based plate

HASTELLOY C276 (UNS N10276)

Some typical applications of HASTELLOY C276 include equipment components in chemical and petrochemical organic chloride processes and processes utilizing halide or acid catalysts. Other industry applications are pulp and paper (digesters and bleach areas), scrubbers and ducting for flue gas desulfurization, pharmaceutical and food processing equipment.

Regular size(mm) of ASTM B575 Hastelloy C-276 :

Cold rolled sheet
0.5 * 1219 * C

1.0 * 1219 * C

1.5 * 1219 * C
2.0 * 1219 * C

2.5 * 1219 * C

3.0 * 1219 * C

Hot rolled sheet
3.0 * 1500 * c

4.0 * 1500 * c

5.0 * 1500 * c
6.0 * 1500 * c

8.0 * 1500 * c

10 * 1500 * c
12 * 1500 * c

14 * 1500 * c

16 * 1500 * 6000

18 * 1500 * 6000

20 * 1500 * 6000
25 * 1500 * 6000

30 * 1500 * 6000

Length:
As your requirement.

Applications of ASTM B575 Hastelloy C-276:

Digesters and bleach plants in the paper industry.

Components exposed to sour gas.

Equipment for flue-gas desulfurisation plants.

Evaporators, heat exchangers, filters and mixers used in sulfuric acid environments.

Sulfuric acid reactors.

Organic chloride process equipment.

Equipment for processes utilizing halide or acid catalysts.

Chemical Requirements
	Ni	Cr	Mn	Mo	C	Si	Fe
Max %	Bal.	16.5	1.0	17.0	0.010	0.08	7.0
Min %		14.5		15.0			4.0

Mechanical Property Requirements
	Ultimate Tensile	Yield Strength (0.2% OS)	Elong. in 2 in. (50.8mm) or 4D min,%	R/A	Hardness
Min	100 KSi	41 KSi	40
Max
Min (Metric)	690 MPa	283 MPa
Max

Chart of Average Tensile Data At Temperatures

Specifications
Form	Standard
UNS	UNS N10276
Bar	ASTM B574 Din 17752
Wire
Sheet	ASTM B575 Din 17750
Plate	ASTM B575 Din 17750
Fitting	ASTM B366
Forging	ASTM B564
Tube	ASTM B619 ASTM B622 ASTM B626 Din 17751
Pipe	ASTM B619 ASTM B622 ASTM B626 Din 17751
Weld Wire	A5.14 ERNiCrMo-4
Weld Electrode	A5.11 ENiCrMo-4
Din.	2.4819 All Forms

Table 16
RECOMMENDED TOOL TYPES AND MACHINING CONDITIONS
Operations	Carbide Tools
Roughing, with severe interruption	Turning or Facing C-2 and C-3 grade: Negative rake square insert, 45 degree SCEA1, 1/32 in. nose radius. Tool holder: 5 degree neg. back rake, 5 degree neg. side rake. Speed: 30-50 sfm, 0.004-0.008 in. feed, 0.150 in depth of cut. Dry2, oil3, or water-base coolant4.
Normal roughing	Turning or Facing C-2 or C-3 grade: Negative rate square insert, 45 degree SCEA, 1/32 in nose radius. Tool holder: 5 degree neg. back rake, 5 degree neg. side rake. Speed: 90 sfm depending on rigidity of set up, 0.010 in. feed, 0.150 in. depth of cut. Dry, oil, or water-base coolant.
Finishing	Turning or Facing C-2 or C-3 grade: Positive rake square insert, if possible, 45 degree SCEA, 1/32 in. nose radius. Tool holder: 5 degree pos. back rake, 5 degree pos. side rake. Speed: 95-110 sfm, 0.005-0.007 in. feed, 0.040 in. depth of cut. Dry or water-base coolant.
Rough Boring	C-2 or C-3 grade: If insert type boring bar, use standard positive rake tools with largest possible SCEA and 1/16 in. nose radius. If brazed tool bar, grind 0 degree back rake, 10 degree pos. side rake, 1/32 in. nose radius and largest possible SCEA. Speed: 70 sfm depending on the rigidity of setup, 0.005-0.008 in. feed, 1/8 in. depth of cut. Dry, oil or water-base coolant.
Finish Boring	C-2 or C-3 grade: Use standard positive rake tools on insert type bars. Grind brazed tools as for finish turning and facing except back rake may be best at 0 degrees. Speed: 95-110 sfm, 0.002-0.004 in feed. Water-base coolant.
Notes:
1 SCEA - Side cutting edge angle or lead angle of the tool. 2 At any point where dry cutting is recommended, an air jet directed on the tool may provide substantial tool life increases. A water-base coolant mist may also be effective. 3 Oil coolant should be premium quality, sulfochlorinated oil with extreme pressure additives. A viscosity at 100 degrees F from 50 to 125 SSU. 4 Water-base coolant should be premium quality, sulfochlorinated water soluble oil or chemical emulsion with extreme pressure additives. Dilute with water to make 15:1 mix. Water-base coolant may cause chipping and rapid failure of carbide tools in interrupted cuts.

Table 17
RECOMMENDED TOOL TYPES AND MACHINING CONDITIONS
Operations	Carbide Tools
Facing Milling	Carbide not generally successful, C- grade may work. Use positive axial and radial rake, 45 degree corner angle, 10 degree relief angle. Speed: 50-60 sfm. Feed: 0.005-0.008 in. Oil or waterbase coolants will reduce thermal shock damage of carbide cutter teeth.
End Milling	Not recommended , but C-2 grades may be successful on good setups. Use positive rake. Speed: 50-60 sfm. Feed: Same as high speed steel. Oil or water-base coolants will reduce thermal shock damage.
Drilling	C-2 grade not recommended, but tipped drills may be successful on rigid setup if no great depth. The web must thinned to reduce thrust. Use 135 degree included angle on point. Gun drill can be used. Speed: 50 sfm. Oil or water-base coolant. Coolant-feed carbide tipped drills may be economical in some setups.
Reaming	C-2 or C-3 grade: Tipped reamers recommended, solid carbide reamers require vary good setup. Tool geometry same as high speed steel. Speed: 50 sfm. Feed: Same as high speed steel.
Tapping	Not recommended, machine threads, or roll-form them.
Electrical Discharge Machining	The alloys can be easily cut using any conventional electrical discharge machining system (EDM) or wire (EDM).
Notes:
5 M-40 series High Speed Steels include M-41 , M-42, M-43, M-44, M-45 and M-46 at the time of writing. Others may be added and should be equally suitable. 6 Oil coolant should be a premium quality, sulfochlorinated oil with extreme pressure additives. A viscosity at 100 degree F from 50 to 125 SSU. 7 Water-base coolant should be premium quality, sulfochlorinated water soluble oil or chemical emulsion with extreme pressure additives. Dilute with water to make 15:1 mix.

Table 18
Plasma Arc Cutting
Our alloys can be cut using any conventional plasma arc cutting system. The best arc quality is achieved using a mixture of argon and hydrogen gases. Nitrogen gas can be substituted for hydrogen gases, but the cut quality will deteriorate slightly. Shop air or any oxygen bearing gases should be avoided when plasma cutting these alloys.

SHANGHAI ABOOM METAL PRODUCT CO.,LTD

Address:ROOM 412,NO.452 CHEFENG ROAD,

SongjiangDistrict , Shanghai ,201601,P.R.China　

Product Tags:

ASTM B575 hastelloy c276 sheet

2.4819 hastelloy c276 sheet

ASTM B575 hastelloy c276 plate

Petrochemical 2.4819 ASTM B575 Hastelloy C276 Sheet

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shanghai Aboom Metal prodcut co.,ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!